How To Make Your Very Own Homemade Marijuana E-Liquid (For Use In An E-Cig)
If you’re an e-cig smoker and annoyed by the fact that you have to keep separate devices for you nicotine and THC, then this is the tutorial for you. Today you’ll learn how to make marijuana e-liquid, to be used in e-cig cartridges.
Making your own weed e-liquid is no short process, I just watched a twenty five minute tutorial on how to make my very own marijuana e-liquid (for use in an e-cig), and then afterwards I saw that there were instructions in the YouTube video description. And while you 100% should watch the video, because you don’t really want to wing it, these are the steps you need to make your own marijuana e-liquid (from Lets Vape):
1: Pre heat a fan oven to 100C or 220F
2: Grind herbs until medium to fine
3: Place herbs in ceramic dish and cover with foil.
4: Place the dish into the oven for 30-40 minutes.
5: Prepare the solution use a ratio of 8ml liquid to 1g herb for a low strength, 5ml of liquid for a medium strength
6: Use 7 parts Vegetable Glycerine to 3 parts Propylene glycol
7: Remove herbs from the oven and allow to cool before removing foil
8: Place herbs into mason jar containing solution and mix well.
9: Place jar into hot water bath and shake/swirl every 15-20 minutes.
10: Continue this for 2-3 hours.
11: Keep lid on for the entire process.
12: Once the time is done, remove from the heat and allow the jar to cool until you can handle it safely.
13: Place contents of the jar into material, and then proceed to squeeze out the liquid. You can use a potato/rice press, fine sieve, cheese cloth to help with this process.
14: Collect liquid with syringes and place into the dropper bottles.
15: Add any flavourings your might want to add (optional)
16: Enjoy end product, store in a cool – dark place and use in any e-cigarette you wish. Product will last up to 12 months.
And if you’re looking for more in-depth written instructions you can CLICK HERE.
And for those of you looking to add a little flavor to your marijuana e-liquid, here’s a quick tutorial on that: